FX2N-64MR-ES/UL Programmable Controller Plc Base Unit 2amp 40w

Mitsubishi FX2N-64MR-ES/UL PROGRAMMABLE CONTROLLER PLC BASE UNIT 2AMP 40W NEW

Description:

• FX2N64MRESUL
• PROGRAMMABLE CONTROLLER
• PLC BASE UNIT
• 2 AMP
• 100/240 VAC
• 30 VDC
• 50/60 HZ
• 40 WATT

MITSUBISHI inverter FR-F720 series.
Voltage level: three phase 200V.
Frequency converter capacity: 45KW.
When the ring is opened, the frequency converter is provided with a load of the motor when the motor is operated with a load at a given frequency,
The range of the motor speed in the rated slip ratio (1%~5%) changes FX2N-64MR-ES/UL datasheet.
For the requirements of relatively high precision, even if the load changes are also required to operate at a given speed of the occasion,
Inverter with PG feedback function can be used (selection) FX2N-64MR-ES/UL
If the given acceleration time is too short, the output frequency of the inverter is far more than the change of the speed (electric angular frequency),
Converter will be due to flow over the current trip, the operation stopped, which is called stall FX2N-64MR-ES/UL datasheet. MITSUBISHI inverter series: FR-F840.
Voltage level: three phase 400V.
Power: 250kw.
SLD converter rated current: 547A.
Structure and function: Standard model.
Type: CA.
Substrate coating: have.
The motor efficiency is not changed in the previous optimal excitation control,
At the same time, the newly developed advanced optimal excitation control can obtain larger torque at startup FX2N-64MR-ES/UL datasheet.
No need to adjust the parameters (plus deceleration time or torque, etc.), in a short time to speed up to a certain speed,
Can be carried out to maximize the efficiency of energy-saving drive motor.
The automatic tuning function of the loop constant of the motor is not consistent with the constant of the motor, the motor of other manufacturers, and the length of wiring is too long,
Optimum operating characteristic drive motor.
In the state of the sensor can not only drive the high efficiency and energy saving motor and PM motor (MM-EFS), but also can drive other companies induction motor and PM motor (permanent magnet synchronous motor).
Other manufacturers of induction motors, can also be automatically tuned to achieve the best excitation control, thus expanding the use of energy saving. Function: RS-232C communication.
Adapter for connecting the left extension function of the CPU module.
CPU module can be connected to the left side up to 6 units. Max input / output points: 128 points.
Supply voltage: 100 - 240VAC.
Input points: 64 points.
Output points: 64 points.
Output type: relay.
Power consumption: 100VA.
Weight (kg):1.8.
Size (WxHxD) mm:350x90x87.
Clock function and hour meter function, all of the PLC FX2N has a real-time clock standard.
Continuous scanning function, to define the operation cycle for the application of the continuous scan time.
Input filter adjustment function, you can use the input filter to smooth the input signal (in the basic unit x000 to x017).
Note recording function, Component annotation can be recorded in the program register.
Since the FX2n series have the following features: the maximum range of inclusive of the standard features, program execution faster, the full complement of communication function, suitable for different countries in the world, and the power to meet a large number of special function modules of individual needs,
It can provide maximum flexibility and control capability for your factory automation applications.
Control 16~256 point.
Built in 8K capacity of the RAM memory, the maximum can be extended to 16K.
CPU arithmetic processing speed of 0.08 S/ basic instructions.
On the right side of the FX2N seriess can be connected to the input and output expansion modules and special function modules FX2N-64MR-ES/UL PDF datasheet.
The basic unit is built in the 2 axis independent maximum 20kHz positioning function (transistor output type).
Quick disconnect the terminal block, which adopts excellent maintainability to quickly disconnect the terminal blocks, even if the cable is then replaced by the cable FX2N-64MR-ES/UL PDF datasheet.

Features:

  A programmable logic controller, PLC, or controller is a digital computer used for the automation of typical industrial electromechanical processes, such as mechanical control of factory assembly lines, amusement devices or lamps. PLC is designed for multiple layouts of digital and analog input and output, extended temperature range, resistance to electrical noise, vibration and shock. An example of a "hard" real-time system, because the output result must be produced in a limited continuous response to the input conditions, otherwise it will cause unexpected operation

The main difference from other computers is that PLCs are armored under harsh conditions (such as dust, humidity, heat, and cold) and have a wide range of input/output (I/O) facility arrangements. These connect PLCs to sensors and Actuator. PLCs read the position of limit switches, analog process variables (such as temperature and pressure), and complex positioning systems. Some use machine vision. On the actuator side, PLCs operate motors, pneumatic or hydraulic cylinders, magnetic relays, solenoids or analog outputs. The input/output device can be built into a simple PLC, or the PLC can have external I/O modules connected to a computer network plugged into the PLC.

What is a PLC system?

CPU module
Power module
One or more I/O modules Digital I/O modules
Analog I/O module
Communication interface module

Type plc

An integrated or compact PLC
Modular PLC
Small PLC
Medium PLC
Large PLC

FX1N Series Programmable Logic Controllers

Product introduction

MORE INFORMATION

DELIVERY
 
Logistic partners UPS, FedEx and DHL
 
International delivery available
 
Same day dispatch from group stock
 
WARRANTY
 
All parts new are covered by Shenzhen Viyork 12 month warranty
 
RETURNS
 
No hassle returns policy
 
Dedicated customer support team
 
PAYMENT
 
Trade credit
 
We understand that credit is a necessary part of business and offer credit agreements on request, subject to status.
 
Payment options
 
We accept Bank transfers and the following methods of payment:
 
Western Union PayPal VISA
 
Pls contact us:
Company: Shenzhen Viyork Technology CO.,LTD.
Cotact:Miss Liu
Moblie/WhatsApp: 0086-13826534820
Email: shenzhenviyork@163.com
Skype:live:.cid.ba9401e01ca235c2