Mitsubishi MR-H200ACN Servo Amplifier 2KW 10A 200-230V 50/60HZ MR-H SERIES NEW AND ORIGINAL GOOD PRICE

MITSUBISHI MR-H200ACN Product information and technical parameters:
Brand: MITSUBISHI
Name: Servo amplifier
Model: MR-H200ACN
Drive: MR-H_ACN series built-in positioning function.
Rated output: 2.0KW.
In servo drive speed closed loop,
Rotor speed measurement accuracy is very important to improve the dynamic and static characteristics of the speed control loop.
 

In order to seek the balance between measurement precision and system cost, incremental photoelectric encoder is generally used as the speed measuring sensor,
The corresponding method is M/T velocity measurement.
Although the M/T measurement method has a certain measurement accuracy and a wide range of measurement,
But this method has its inherent defects,
Mainly includes: the measurement period must be detected at least one complete encoder pulse, limiting the minimum detectable speed.
 

2 control system for speed control of the timer switch is difficult to maintain synchronization,
Can not guarantee the accuracy of measurement in the situation where the speed change is larger.
Therefore, it is difficult to improve the speed tracking and control performance of servo drive by using the traditional speed loop design method.

Type: HF-KN servo motor, low inertia, low power.
Rated output power: 0.75kw.
Rated speed: 3000r/min.
Electromagnetic brake: there.
Oil seal: have.
Encoder resolution: 131072p/r.
 

S100 representative: Super MR-E special motor.
KH003 special mark for Super MR-E.
High performance and easy to operate, reduce work load MITSUBISHI MR-H200ACN.
Enhanced system cost performance.
High performance, high precision positioning (servo motor encoder resolution: 131072) MR-H200ACN
High response.
Suppression of vibration by adaptive vibration suppression control.
Using personal computer and servo setup software to optimize tuning.
 

Has 2 types of interfaces:
Position control and speed control with pulse train interface.
The analog input interface is used for speed control and torque control MITSUBISHI MR-H200ACN.
Wide use.
Machining equipment and machine tool feed.
Used for food, packaging equipment and feeding device.
For textile machinery, etc..
Can improve the performance of equipment.
 

Servo amplifier terminals are used to reduce the required wiring time.
The connector is located in front of the servo amplifier, which is convenient for cable connection MITSUBISHI MR-H200ACN.
The gain adjustment can be easily carried out by the real-time automatic tuning function. Type: general purpose AC servo amplifier MR-E series.
Rated output: 0.1kw.
Interface type: analog input interface.
KH003 special mark for Super MR-E.
Servo amplifier terminals are used to reduce the required wiring time.
 

The connector is located in front of the servo amplifier, which is convenient for cable connection.
The gain adjustment can be easily carried out by the real-time automatic tuning function.
Wide use.
Machining equipment and machine tool feed.
Used for food, packaging equipment and feeding device.
For textile machinery, etc..
Can improve the performancee of equipment MR-H200ACN. Motor series: ultra low inertia, low power.
 

Rated output power: 0.75kw.
Rated speed: 3000r/min.
Whether to bring the brakes: with.
Shaft end: Standard (straight).
Protection level: IP55 does not include the shaft part and the connector MR-H200ACN.
Features: ultra low inertia is suitable for high frequency operation.
Application examples: the insertion device, the assembly machine.

 

 

 

MDS-C1-V1-70
MDS-C1-V1-01
MDS-C1-V1-03
MDS-C1-V1-05
MDS-C1-V1-20
MDS-C1-V1-35

MDS-B-SVJ2-01
MDS-B-SVJ2-03
MDS-B-SVJ2-04
MDS-B-SVJ2-06
MDS-B-SVJ2-07
MDS-B-SVJ2-10
MDS-B-SVJ2-20
MDS-B-SPJ2-02
MDS-B-SPJ2-04
MDS-B-SPJ2-075
MDS-B-SPJ2-15
MDS-B-SPJ2-22
MDS-B-SPJ2-37
MDS-B-SPJ2-55
MDS-B-SPJ2-75
MDS-B-SPJ2-110

MDS-D-SVJ3-01NA

MDS-D-SVJ3-02NA

MDS-D-SVJ3-07NA

MDS-D-SVJ3-10NA

MDS-D-SVJ3-20NA